Use the filter to select the FAQs you’re most interested in.

Overview

Sofeast carry out these checks to assure you that a potential supplier is not a ‘scammer’ and has their story straight, is offering competitive pricing, and is a good match for your business.

If you are concerned about being scammed or employing a middle-man posing as a factory to produce your orders (and you should be) then you should run background checks.

Follow this link to explore our background checks, and learn more about what they include, the cost, and how long they take.

If you work with supplier in China who keep raising the costs of materials unexpectedly you can check actual costs using www.sci99.com. Please note, it’s not cheap, though.

Yes, we can help you to source export-ready components suppliers in China, Vietnam, India, or SE Asia.

You need to choose our New Supplier Sourcing / Factory Identification solution.

We’ll need to know information such as:

  • Product you want to buy (description and photos/drawings)
  • Is it an existing product or completely new?
  • Desired quality standard
  • Expected volume (amount you plan to purchase)
  • Have you already contacted some suppliers of this type of product?
  • In what country(ies) will you sell this product?

P.S.

If you’d prefer to take a hands-off approach, we can also act as your procurement office where we not only source suppliers, but also take delivery of components or products, inspect them, pack and ship them, and pay the suppliers on your behalf.

Leave a Reply

Your email address will not be published. Required fields are marked *

Yes, we can!

As you know, leaving your tooling, which is an expensive investment and important IP, at your supplier’s facility opens you up to certain issues:

  • It may not be stored correctly and could be damaged.
  • They may decide to use it without authorization, producing copies of your product which are then shared or sold without your knowledge or agreement.

So in order to prevent your supplier from holding all of the cards, we provide a tooling custody and management solution where we pick or receive your tooling and store it safely and securely at our Dongguan facility, returning it to your supplier only when needed once more.

Yes. If you’re getting plastic injection molds made in China we can send an engineer who is experienced in tooling fabrication and usage to your toolmaker’s shop to supervise their final testing and validation of the molds. This means that the risks of you or your plastic injection parts supplier receiving defective tooling are vastly reduced as it’s confirmed that your tooling has reached your standards.

Since tooling is such an expensive investment, it pays to thoroughly check it at the toolmaker before it’s sent to be used in mass production.

Here’s the solution you can choose: Mold Capability Validation Supervision (in China)

Working with Sofeast

Sofeast carry out these checks to assure you that a potential supplier is not a ‘scammer’ and has their story straight, is offering competitive pricing, and is a good match for your business.

If you are concerned about being scammed or employing a middle-man posing as a factory to produce your orders (and you should be) then you should run background checks.

Follow this link to explore our background checks, and learn more about what they include, the cost, and how long they take.

If you work with supplier in China who keep raising the costs of materials unexpectedly you can check actual costs using www.sci99.com. Please note, it’s not cheap, though.

Yes, we can help you to source export-ready components suppliers in China, Vietnam, India, or SE Asia.

You need to choose our New Supplier Sourcing / Factory Identification solution.

We’ll need to know information such as:

  • Product you want to buy (description and photos/drawings)
  • Is it an existing product or completely new?
  • Desired quality standard
  • Expected volume (amount you plan to purchase)
  • Have you already contacted some suppliers of this type of product?
  • In what country(ies) will you sell this product?

P.S.

If you’d prefer to take a hands-off approach, we can also act as your procurement office where we not only source suppliers, but also take delivery of components or products, inspect them, pack and ship them, and pay the suppliers on your behalf.

Leave a Reply

Your email address will not be published. Required fields are marked *

Yes, we can!

As you know, leaving your tooling, which is an expensive investment and important IP, at your supplier’s facility opens you up to certain issues:

  • It may not be stored correctly and could be damaged.
  • They may decide to use it without authorization, producing copies of your product which are then shared or sold without your knowledge or agreement.

So in order to prevent your supplier from holding all of the cards, we provide a tooling custody and management solution where we pick or receive your tooling and store it safely and securely at our Dongguan facility, returning it to your supplier only when needed once more.

Yes. If you’re getting plastic injection molds made in China we can send an engineer who is experienced in tooling fabrication and usage to your toolmaker’s shop to supervise their final testing and validation of the molds. This means that the risks of you or your plastic injection parts supplier receiving defective tooling are vastly reduced as it’s confirmed that your tooling has reached your standards.

Since tooling is such an expensive investment, it pays to thoroughly check it at the toolmaker before it’s sent to be used in mass production.

Here’s the solution you can choose: Mold Capability Validation Supervision (in China)

For new/customized products

Sofeast carry out these checks to assure you that a potential supplier is not a ‘scammer’ and has their story straight, is offering competitive pricing, and is a good match for your business.

If you are concerned about being scammed or employing a middle-man posing as a factory to produce your orders (and you should be) then you should run background checks.

Follow this link to explore our background checks, and learn more about what they include, the cost, and how long they take.

If you work with supplier in China who keep raising the costs of materials unexpectedly you can check actual costs using www.sci99.com. Please note, it’s not cheap, though.

Yes, we can help you to source export-ready components suppliers in China, Vietnam, India, or SE Asia.

You need to choose our New Supplier Sourcing / Factory Identification solution.

We’ll need to know information such as:

  • Product you want to buy (description and photos/drawings)
  • Is it an existing product or completely new?
  • Desired quality standard
  • Expected volume (amount you plan to purchase)
  • Have you already contacted some suppliers of this type of product?
  • In what country(ies) will you sell this product?

P.S.

If you’d prefer to take a hands-off approach, we can also act as your procurement office where we not only source suppliers, but also take delivery of components or products, inspect them, pack and ship them, and pay the suppliers on your behalf.

Leave a Reply

Your email address will not be published. Required fields are marked *

Yes, we can!

As you know, leaving your tooling, which is an expensive investment and important IP, at your supplier’s facility opens you up to certain issues:

  • It may not be stored correctly and could be damaged.
  • They may decide to use it without authorization, producing copies of your product which are then shared or sold without your knowledge or agreement.

So in order to prevent your supplier from holding all of the cards, we provide a tooling custody and management solution where we pick or receive your tooling and store it safely and securely at our Dongguan facility, returning it to your supplier only when needed once more.

Yes. If you’re getting plastic injection molds made in China we can send an engineer who is experienced in tooling fabrication and usage to your toolmaker’s shop to supervise their final testing and validation of the molds. This means that the risks of you or your plastic injection parts supplier receiving defective tooling are vastly reduced as it’s confirmed that your tooling has reached your standards.

Since tooling is such an expensive investment, it pays to thoroughly check it at the toolmaker before it’s sent to be used in mass production.

Here’s the solution you can choose: Mold Capability Validation Supervision (in China)

Quality assurance solutions

Product Inspections

Sofeast carry out these checks to assure you that a potential supplier is not a ‘scammer’ and has their story straight, is offering competitive pricing, and is a good match for your business.

If you are concerned about being scammed or employing a middle-man posing as a factory to produce your orders (and you should be) then you should run background checks.

Follow this link to explore our background checks, and learn more about what they include, the cost, and how long they take.

If you work with supplier in China who keep raising the costs of materials unexpectedly you can check actual costs using www.sci99.com. Please note, it’s not cheap, though.

Yes, we can help you to source export-ready components suppliers in China, Vietnam, India, or SE Asia.

You need to choose our New Supplier Sourcing / Factory Identification solution.

We’ll need to know information such as:

  • Product you want to buy (description and photos/drawings)
  • Is it an existing product or completely new?
  • Desired quality standard
  • Expected volume (amount you plan to purchase)
  • Have you already contacted some suppliers of this type of product?
  • In what country(ies) will you sell this product?

P.S.

If you’d prefer to take a hands-off approach, we can also act as your procurement office where we not only source suppliers, but also take delivery of components or products, inspect them, pack and ship them, and pay the suppliers on your behalf.

Leave a Reply

Your email address will not be published. Required fields are marked *

Yes, we can!

As you know, leaving your tooling, which is an expensive investment and important IP, at your supplier’s facility opens you up to certain issues:

  • It may not be stored correctly and could be damaged.
  • They may decide to use it without authorization, producing copies of your product which are then shared or sold without your knowledge or agreement.

So in order to prevent your supplier from holding all of the cards, we provide a tooling custody and management solution where we pick or receive your tooling and store it safely and securely at our Dongguan facility, returning it to your supplier only when needed once more.

Yes. If you’re getting plastic injection molds made in China we can send an engineer who is experienced in tooling fabrication and usage to your toolmaker’s shop to supervise their final testing and validation of the molds. This means that the risks of you or your plastic injection parts supplier receiving defective tooling are vastly reduced as it’s confirmed that your tooling has reached your standards.

Since tooling is such an expensive investment, it pays to thoroughly check it at the toolmaker before it’s sent to be used in mass production.

Here’s the solution you can choose: Mold Capability Validation Supervision (in China)

Factory Audits

Sofeast carry out these checks to assure you that a potential supplier is not a ‘scammer’ and has their story straight, is offering competitive pricing, and is a good match for your business.

If you are concerned about being scammed or employing a middle-man posing as a factory to produce your orders (and you should be) then you should run background checks.

Follow this link to explore our background checks, and learn more about what they include, the cost, and how long they take.

If you work with supplier in China who keep raising the costs of materials unexpectedly you can check actual costs using www.sci99.com. Please note, it’s not cheap, though.

Yes, we can help you to source export-ready components suppliers in China, Vietnam, India, or SE Asia.

You need to choose our New Supplier Sourcing / Factory Identification solution.

We’ll need to know information such as:

  • Product you want to buy (description and photos/drawings)
  • Is it an existing product or completely new?
  • Desired quality standard
  • Expected volume (amount you plan to purchase)
  • Have you already contacted some suppliers of this type of product?
  • In what country(ies) will you sell this product?

P.S.

If you’d prefer to take a hands-off approach, we can also act as your procurement office where we not only source suppliers, but also take delivery of components or products, inspect them, pack and ship them, and pay the suppliers on your behalf.

Leave a Reply

Your email address will not be published. Required fields are marked *

Yes, we can!

As you know, leaving your tooling, which is an expensive investment and important IP, at your supplier’s facility opens you up to certain issues:

  • It may not be stored correctly and could be damaged.
  • They may decide to use it without authorization, producing copies of your product which are then shared or sold without your knowledge or agreement.

So in order to prevent your supplier from holding all of the cards, we provide a tooling custody and management solution where we pick or receive your tooling and store it safely and securely at our Dongguan facility, returning it to your supplier only when needed once more.

Yes. If you’re getting plastic injection molds made in China we can send an engineer who is experienced in tooling fabrication and usage to your toolmaker’s shop to supervise their final testing and validation of the molds. This means that the risks of you or your plastic injection parts supplier receiving defective tooling are vastly reduced as it’s confirmed that your tooling has reached your standards.

Since tooling is such an expensive investment, it pays to thoroughly check it at the toolmaker before it’s sent to be used in mass production.

Here’s the solution you can choose: Mold Capability Validation Supervision (in China)

Quality Consulting

Sofeast carry out these checks to assure you that a potential supplier is not a ‘scammer’ and has their story straight, is offering competitive pricing, and is a good match for your business.

If you are concerned about being scammed or employing a middle-man posing as a factory to produce your orders (and you should be) then you should run background checks.

Follow this link to explore our background checks, and learn more about what they include, the cost, and how long they take.

If you work with supplier in China who keep raising the costs of materials unexpectedly you can check actual costs using www.sci99.com. Please note, it’s not cheap, though.

Yes, we can help you to source export-ready components suppliers in China, Vietnam, India, or SE Asia.

You need to choose our New Supplier Sourcing / Factory Identification solution.

We’ll need to know information such as:

  • Product you want to buy (description and photos/drawings)
  • Is it an existing product or completely new?
  • Desired quality standard
  • Expected volume (amount you plan to purchase)
  • Have you already contacted some suppliers of this type of product?
  • In what country(ies) will you sell this product?

P.S.

If you’d prefer to take a hands-off approach, we can also act as your procurement office where we not only source suppliers, but also take delivery of components or products, inspect them, pack and ship them, and pay the suppliers on your behalf.

Leave a Reply

Your email address will not be published. Required fields are marked *

Yes, we can!

As you know, leaving your tooling, which is an expensive investment and important IP, at your supplier’s facility opens you up to certain issues:

  • It may not be stored correctly and could be damaged.
  • They may decide to use it without authorization, producing copies of your product which are then shared or sold without your knowledge or agreement.

So in order to prevent your supplier from holding all of the cards, we provide a tooling custody and management solution where we pick or receive your tooling and store it safely and securely at our Dongguan facility, returning it to your supplier only when needed once more.

Yes. If you’re getting plastic injection molds made in China we can send an engineer who is experienced in tooling fabrication and usage to your toolmaker’s shop to supervise their final testing and validation of the molds. This means that the risks of you or your plastic injection parts supplier receiving defective tooling are vastly reduced as it’s confirmed that your tooling has reached your standards.

Since tooling is such an expensive investment, it pays to thoroughly check it at the toolmaker before it’s sent to be used in mass production.

Here’s the solution you can choose: Mold Capability Validation Supervision (in China)

Supply chain management solutions

Sofeast carry out these checks to assure you that a potential supplier is not a ‘scammer’ and has their story straight, is offering competitive pricing, and is a good match for your business.

If you are concerned about being scammed or employing a middle-man posing as a factory to produce your orders (and you should be) then you should run background checks.

Follow this link to explore our background checks, and learn more about what they include, the cost, and how long they take.

If you work with supplier in China who keep raising the costs of materials unexpectedly you can check actual costs using www.sci99.com. Please note, it’s not cheap, though.

Yes, we can help you to source export-ready components suppliers in China, Vietnam, India, or SE Asia.

You need to choose our New Supplier Sourcing / Factory Identification solution.

We’ll need to know information such as:

  • Product you want to buy (description and photos/drawings)
  • Is it an existing product or completely new?
  • Desired quality standard
  • Expected volume (amount you plan to purchase)
  • Have you already contacted some suppliers of this type of product?
  • In what country(ies) will you sell this product?

P.S.

If you’d prefer to take a hands-off approach, we can also act as your procurement office where we not only source suppliers, but also take delivery of components or products, inspect them, pack and ship them, and pay the suppliers on your behalf.

Leave a Reply

Your email address will not be published. Required fields are marked *

Yes, we can!

As you know, leaving your tooling, which is an expensive investment and important IP, at your supplier’s facility opens you up to certain issues:

  • It may not be stored correctly and could be damaged.
  • They may decide to use it without authorization, producing copies of your product which are then shared or sold without your knowledge or agreement.

So in order to prevent your supplier from holding all of the cards, we provide a tooling custody and management solution where we pick or receive your tooling and store it safely and securely at our Dongguan facility, returning it to your supplier only when needed once more.

Yes. If you’re getting plastic injection molds made in China we can send an engineer who is experienced in tooling fabrication and usage to your toolmaker’s shop to supervise their final testing and validation of the molds. This means that the risks of you or your plastic injection parts supplier receiving defective tooling are vastly reduced as it’s confirmed that your tooling has reached your standards.

Since tooling is such an expensive investment, it pays to thoroughly check it at the toolmaker before it’s sent to be used in mass production.

Here’s the solution you can choose: Mold Capability Validation Supervision (in China)

Compliance and Certification

Sofeast carry out these checks to assure you that a potential supplier is not a ‘scammer’ and has their story straight, is offering competitive pricing, and is a good match for your business.

If you are concerned about being scammed or employing a middle-man posing as a factory to produce your orders (and you should be) then you should run background checks.

Follow this link to explore our background checks, and learn more about what they include, the cost, and how long they take.

If you work with supplier in China who keep raising the costs of materials unexpectedly you can check actual costs using www.sci99.com. Please note, it’s not cheap, though.

Yes, we can help you to source export-ready components suppliers in China, Vietnam, India, or SE Asia.

You need to choose our New Supplier Sourcing / Factory Identification solution.

We’ll need to know information such as:

  • Product you want to buy (description and photos/drawings)
  • Is it an existing product or completely new?
  • Desired quality standard
  • Expected volume (amount you plan to purchase)
  • Have you already contacted some suppliers of this type of product?
  • In what country(ies) will you sell this product?

P.S.

If you’d prefer to take a hands-off approach, we can also act as your procurement office where we not only source suppliers, but also take delivery of components or products, inspect them, pack and ship them, and pay the suppliers on your behalf.

Leave a Reply

Your email address will not be published. Required fields are marked *

Yes, we can!

As you know, leaving your tooling, which is an expensive investment and important IP, at your supplier’s facility opens you up to certain issues:

  • It may not be stored correctly and could be damaged.
  • They may decide to use it without authorization, producing copies of your product which are then shared or sold without your knowledge or agreement.

So in order to prevent your supplier from holding all of the cards, we provide a tooling custody and management solution where we pick or receive your tooling and store it safely and securely at our Dongguan facility, returning it to your supplier only when needed once more.

Yes. If you’re getting plastic injection molds made in China we can send an engineer who is experienced in tooling fabrication and usage to your toolmaker’s shop to supervise their final testing and validation of the molds. This means that the risks of you or your plastic injection parts supplier receiving defective tooling are vastly reduced as it’s confirmed that your tooling has reached your standards.

Since tooling is such an expensive investment, it pays to thoroughly check it at the toolmaker before it’s sent to be used in mass production.

Here’s the solution you can choose: Mold Capability Validation Supervision (in China)

Logistics

Sofeast carry out these checks to assure you that a potential supplier is not a ‘scammer’ and has their story straight, is offering competitive pricing, and is a good match for your business.

If you are concerned about being scammed or employing a middle-man posing as a factory to produce your orders (and you should be) then you should run background checks.

Follow this link to explore our background checks, and learn more about what they include, the cost, and how long they take.

If you work with supplier in China who keep raising the costs of materials unexpectedly you can check actual costs using www.sci99.com. Please note, it’s not cheap, though.

Yes, we can help you to source export-ready components suppliers in China, Vietnam, India, or SE Asia.

You need to choose our New Supplier Sourcing / Factory Identification solution.

We’ll need to know information such as:

  • Product you want to buy (description and photos/drawings)
  • Is it an existing product or completely new?
  • Desired quality standard
  • Expected volume (amount you plan to purchase)
  • Have you already contacted some suppliers of this type of product?
  • In what country(ies) will you sell this product?

P.S.

If you’d prefer to take a hands-off approach, we can also act as your procurement office where we not only source suppliers, but also take delivery of components or products, inspect them, pack and ship them, and pay the suppliers on your behalf.

Leave a Reply

Your email address will not be published. Required fields are marked *

Yes, we can!

As you know, leaving your tooling, which is an expensive investment and important IP, at your supplier’s facility opens you up to certain issues:

  • It may not be stored correctly and could be damaged.
  • They may decide to use it without authorization, producing copies of your product which are then shared or sold without your knowledge or agreement.

So in order to prevent your supplier from holding all of the cards, we provide a tooling custody and management solution where we pick or receive your tooling and store it safely and securely at our Dongguan facility, returning it to your supplier only when needed once more.

Yes. If you’re getting plastic injection molds made in China we can send an engineer who is experienced in tooling fabrication and usage to your toolmaker’s shop to supervise their final testing and validation of the molds. This means that the risks of you or your plastic injection parts supplier receiving defective tooling are vastly reduced as it’s confirmed that your tooling has reached your standards.

Since tooling is such an expensive investment, it pays to thoroughly check it at the toolmaker before it’s sent to be used in mass production.

Here’s the solution you can choose: Mold Capability Validation Supervision (in China)

Product engineering solutions pricing FAQs

Sofeast carry out these checks to assure you that a potential supplier is not a ‘scammer’ and has their story straight, is offering competitive pricing, and is a good match for your business.

If you are concerned about being scammed or employing a middle-man posing as a factory to produce your orders (and you should be) then you should run background checks.

Follow this link to explore our background checks, and learn more about what they include, the cost, and how long they take.

If you work with supplier in China who keep raising the costs of materials unexpectedly you can check actual costs using www.sci99.com. Please note, it’s not cheap, though.

Yes, we can help you to source export-ready components suppliers in China, Vietnam, India, or SE Asia.

You need to choose our New Supplier Sourcing / Factory Identification solution.

We’ll need to know information such as:

  • Product you want to buy (description and photos/drawings)
  • Is it an existing product or completely new?
  • Desired quality standard
  • Expected volume (amount you plan to purchase)
  • Have you already contacted some suppliers of this type of product?
  • In what country(ies) will you sell this product?

P.S.

If you’d prefer to take a hands-off approach, we can also act as your procurement office where we not only source suppliers, but also take delivery of components or products, inspect them, pack and ship them, and pay the suppliers on your behalf.

Leave a Reply

Your email address will not be published. Required fields are marked *

Yes, we can!

As you know, leaving your tooling, which is an expensive investment and important IP, at your supplier’s facility opens you up to certain issues:

  • It may not be stored correctly and could be damaged.
  • They may decide to use it without authorization, producing copies of your product which are then shared or sold without your knowledge or agreement.

So in order to prevent your supplier from holding all of the cards, we provide a tooling custody and management solution where we pick or receive your tooling and store it safely and securely at our Dongguan facility, returning it to your supplier only when needed once more.

Yes. If you’re getting plastic injection molds made in China we can send an engineer who is experienced in tooling fabrication and usage to your toolmaker’s shop to supervise their final testing and validation of the molds. This means that the risks of you or your plastic injection parts supplier receiving defective tooling are vastly reduced as it’s confirmed that your tooling has reached your standards.

Since tooling is such an expensive investment, it pays to thoroughly check it at the toolmaker before it’s sent to be used in mass production.

Here’s the solution you can choose: Mold Capability Validation Supervision (in China)

Quality Assurance solutions pricing FAQs

Sofeast carry out these checks to assure you that a potential supplier is not a ‘scammer’ and has their story straight, is offering competitive pricing, and is a good match for your business.

If you are concerned about being scammed or employing a middle-man posing as a factory to produce your orders (and you should be) then you should run background checks.

Follow this link to explore our background checks, and learn more about what they include, the cost, and how long they take.

If you work with supplier in China who keep raising the costs of materials unexpectedly you can check actual costs using www.sci99.com. Please note, it’s not cheap, though.

Yes, we can help you to source export-ready components suppliers in China, Vietnam, India, or SE Asia.

You need to choose our New Supplier Sourcing / Factory Identification solution.

We’ll need to know information such as:

  • Product you want to buy (description and photos/drawings)
  • Is it an existing product or completely new?
  • Desired quality standard
  • Expected volume (amount you plan to purchase)
  • Have you already contacted some suppliers of this type of product?
  • In what country(ies) will you sell this product?

P.S.

If you’d prefer to take a hands-off approach, we can also act as your procurement office where we not only source suppliers, but also take delivery of components or products, inspect them, pack and ship them, and pay the suppliers on your behalf.

Leave a Reply

Your email address will not be published. Required fields are marked *

Yes, we can!

As you know, leaving your tooling, which is an expensive investment and important IP, at your supplier’s facility opens you up to certain issues:

  • It may not be stored correctly and could be damaged.
  • They may decide to use it without authorization, producing copies of your product which are then shared or sold without your knowledge or agreement.

So in order to prevent your supplier from holding all of the cards, we provide a tooling custody and management solution where we pick or receive your tooling and store it safely and securely at our Dongguan facility, returning it to your supplier only when needed once more.

Yes. If you’re getting plastic injection molds made in China we can send an engineer who is experienced in tooling fabrication and usage to your toolmaker’s shop to supervise their final testing and validation of the molds. This means that the risks of you or your plastic injection parts supplier receiving defective tooling are vastly reduced as it’s confirmed that your tooling has reached your standards.

Since tooling is such an expensive investment, it pays to thoroughly check it at the toolmaker before it’s sent to be used in mass production.

Here’s the solution you can choose: Mold Capability Validation Supervision (in China)

Supplier Identification

Sofeast carry out these checks to assure you that a potential supplier is not a ‘scammer’ and has their story straight, is offering competitive pricing, and is a good match for your business.

If you are concerned about being scammed or employing a middle-man posing as a factory to produce your orders (and you should be) then you should run background checks.

Follow this link to explore our background checks, and learn more about what they include, the cost, and how long they take.

If you work with supplier in China who keep raising the costs of materials unexpectedly you can check actual costs using www.sci99.com. Please note, it’s not cheap, though.

Yes, we can help you to source export-ready components suppliers in China, Vietnam, India, or SE Asia.

You need to choose our New Supplier Sourcing / Factory Identification solution.

We’ll need to know information such as:

  • Product you want to buy (description and photos/drawings)
  • Is it an existing product or completely new?
  • Desired quality standard
  • Expected volume (amount you plan to purchase)
  • Have you already contacted some suppliers of this type of product?
  • In what country(ies) will you sell this product?

P.S.

If you’d prefer to take a hands-off approach, we can also act as your procurement office where we not only source suppliers, but also take delivery of components or products, inspect them, pack and ship them, and pay the suppliers on your behalf.

Leave a Reply

Your email address will not be published. Required fields are marked *

Yes, we can!

As you know, leaving your tooling, which is an expensive investment and important IP, at your supplier’s facility opens you up to certain issues:

  • It may not be stored correctly and could be damaged.
  • They may decide to use it without authorization, producing copies of your product which are then shared or sold without your knowledge or agreement.

So in order to prevent your supplier from holding all of the cards, we provide a tooling custody and management solution where we pick or receive your tooling and store it safely and securely at our Dongguan facility, returning it to your supplier only when needed once more.

Yes. If you’re getting plastic injection molds made in China we can send an engineer who is experienced in tooling fabrication and usage to your toolmaker’s shop to supervise their final testing and validation of the molds. This means that the risks of you or your plastic injection parts supplier receiving defective tooling are vastly reduced as it’s confirmed that your tooling has reached your standards.

Since tooling is such an expensive investment, it pays to thoroughly check it at the toolmaker before it’s sent to be used in mass production.

Here’s the solution you can choose: Mold Capability Validation Supervision (in China)

Compliance Testing Consulting FAQs

Sofeast carry out these checks to assure you that a potential supplier is not a ‘scammer’ and has their story straight, is offering competitive pricing, and is a good match for your business.

If you are concerned about being scammed or employing a middle-man posing as a factory to produce your orders (and you should be) then you should run background checks.

Follow this link to explore our background checks, and learn more about what they include, the cost, and how long they take.

If you work with supplier in China who keep raising the costs of materials unexpectedly you can check actual costs using www.sci99.com. Please note, it’s not cheap, though.

Yes, we can help you to source export-ready components suppliers in China, Vietnam, India, or SE Asia.

You need to choose our New Supplier Sourcing / Factory Identification solution.

We’ll need to know information such as:

  • Product you want to buy (description and photos/drawings)
  • Is it an existing product or completely new?
  • Desired quality standard
  • Expected volume (amount you plan to purchase)
  • Have you already contacted some suppliers of this type of product?
  • In what country(ies) will you sell this product?

P.S.

If you’d prefer to take a hands-off approach, we can also act as your procurement office where we not only source suppliers, but also take delivery of components or products, inspect them, pack and ship them, and pay the suppliers on your behalf.

Leave a Reply

Your email address will not be published. Required fields are marked *

Yes, we can!

As you know, leaving your tooling, which is an expensive investment and important IP, at your supplier’s facility opens you up to certain issues:

  • It may not be stored correctly and could be damaged.
  • They may decide to use it without authorization, producing copies of your product which are then shared or sold without your knowledge or agreement.

So in order to prevent your supplier from holding all of the cards, we provide a tooling custody and management solution where we pick or receive your tooling and store it safely and securely at our Dongguan facility, returning it to your supplier only when needed once more.

Yes. If you’re getting plastic injection molds made in China we can send an engineer who is experienced in tooling fabrication and usage to your toolmaker’s shop to supervise their final testing and validation of the molds. This means that the risks of you or your plastic injection parts supplier receiving defective tooling are vastly reduced as it’s confirmed that your tooling has reached your standards.

Since tooling is such an expensive investment, it pays to thoroughly check it at the toolmaker before it’s sent to be used in mass production.

Here’s the solution you can choose: Mold Capability Validation Supervision (in China)

Supply chain management solutions pricing FAQs

Sofeast carry out these checks to assure you that a potential supplier is not a ‘scammer’ and has their story straight, is offering competitive pricing, and is a good match for your business.

If you are concerned about being scammed or employing a middle-man posing as a factory to produce your orders (and you should be) then you should run background checks.

Follow this link to explore our background checks, and learn more about what they include, the cost, and how long they take.

If you work with supplier in China who keep raising the costs of materials unexpectedly you can check actual costs using www.sci99.com. Please note, it’s not cheap, though.

Yes, we can help you to source export-ready components suppliers in China, Vietnam, India, or SE Asia.

You need to choose our New Supplier Sourcing / Factory Identification solution.

We’ll need to know information such as:

  • Product you want to buy (description and photos/drawings)
  • Is it an existing product or completely new?
  • Desired quality standard
  • Expected volume (amount you plan to purchase)
  • Have you already contacted some suppliers of this type of product?
  • In what country(ies) will you sell this product?

P.S.

If you’d prefer to take a hands-off approach, we can also act as your procurement office where we not only source suppliers, but also take delivery of components or products, inspect them, pack and ship them, and pay the suppliers on your behalf.

Leave a Reply

Your email address will not be published. Required fields are marked *

Yes, we can!

As you know, leaving your tooling, which is an expensive investment and important IP, at your supplier’s facility opens you up to certain issues:

  • It may not be stored correctly and could be damaged.
  • They may decide to use it without authorization, producing copies of your product which are then shared or sold without your knowledge or agreement.

So in order to prevent your supplier from holding all of the cards, we provide a tooling custody and management solution where we pick or receive your tooling and store it safely and securely at our Dongguan facility, returning it to your supplier only when needed once more.

Yes. If you’re getting plastic injection molds made in China we can send an engineer who is experienced in tooling fabrication and usage to your toolmaker’s shop to supervise their final testing and validation of the molds. This means that the risks of you or your plastic injection parts supplier receiving defective tooling are vastly reduced as it’s confirmed that your tooling has reached your standards.

Since tooling is such an expensive investment, it pays to thoroughly check it at the toolmaker before it’s sent to be used in mass production.

Here’s the solution you can choose: Mold Capability Validation Supervision (in China)

Sofeast 3PL (Warehousing & Fulfillment) FAQs

Sofeast carry out these checks to assure you that a potential supplier is not a ‘scammer’ and has their story straight, is offering competitive pricing, and is a good match for your business.

If you are concerned about being scammed or employing a middle-man posing as a factory to produce your orders (and you should be) then you should run background checks.

Follow this link to explore our background checks, and learn more about what they include, the cost, and how long they take.

If you work with supplier in China who keep raising the costs of materials unexpectedly you can check actual costs using www.sci99.com. Please note, it’s not cheap, though.

Yes, we can help you to source export-ready components suppliers in China, Vietnam, India, or SE Asia.

You need to choose our New Supplier Sourcing / Factory Identification solution.

We’ll need to know information such as:

  • Product you want to buy (description and photos/drawings)
  • Is it an existing product or completely new?
  • Desired quality standard
  • Expected volume (amount you plan to purchase)
  • Have you already contacted some suppliers of this type of product?
  • In what country(ies) will you sell this product?

P.S.

If you’d prefer to take a hands-off approach, we can also act as your procurement office where we not only source suppliers, but also take delivery of components or products, inspect them, pack and ship them, and pay the suppliers on your behalf.

Leave a Reply

Your email address will not be published. Required fields are marked *

Yes, we can!

As you know, leaving your tooling, which is an expensive investment and important IP, at your supplier’s facility opens you up to certain issues:

  • It may not be stored correctly and could be damaged.
  • They may decide to use it without authorization, producing copies of your product which are then shared or sold without your knowledge or agreement.

So in order to prevent your supplier from holding all of the cards, we provide a tooling custody and management solution where we pick or receive your tooling and store it safely and securely at our Dongguan facility, returning it to your supplier only when needed once more.

Yes. If you’re getting plastic injection molds made in China we can send an engineer who is experienced in tooling fabrication and usage to your toolmaker’s shop to supervise their final testing and validation of the molds. This means that the risks of you or your plastic injection parts supplier receiving defective tooling are vastly reduced as it’s confirmed that your tooling has reached your standards.

Since tooling is such an expensive investment, it pays to thoroughly check it at the toolmaker before it’s sent to be used in mass production.

Here’s the solution you can choose: Mold Capability Validation Supervision (in China)

Get help today

 

Do you need help to get better results from your Chinese suppliers?
Speak with us now. Hit the button below to request a consultation.

Comments are closed.